美國BIOS流量計

　　如果您對該產品感興趣的話,可以給我留言 產品名稱: ML-One氣體流量測量儀產品型號: ML-One產品展商: BIOS簡單介紹ML-One氣體流量測量儀價格，大氣采樣器流量校準器總代理，腐蝕性、可燃性氣體，準確和可追溯性的流量測量。5–50000 sccm的流量范圍，0.15%準確度Accurate & Traceable Primary Flow Measurement for Corrosive and Combustible Gases Flow Range: 5-50,000 sccm ml/minML-One氣體流量測量儀的詳細介紹ML-One氣體流量測量儀價格，大氣采樣器流量校準器總代理，腐蝕性、可燃性氣體，準確和可追溯性的流量測量。5–50000 sccm的流量范圍，0.15%準確度Accurate & Traceable Primary Flow Measurement for Corrosive and Combustible GasesML-OneAccurate & Traceable Primary Flow Measurementfor Corrosive and Combustible GasesThe ML-One™ provides primary gas flow measurement with an uncertainty of (0.15% of reading and +/-.01 ccm) across a flow range of 5 to 50,000 ccm. The ML-One™ is an all-in-one measurement instrument for use in a laboratory or transported on a cart for factory floor measurements. It is designed to measure corrosive gases compatible with wetted path materials: (304-316 stainless steel, borosilicate glass, Teflon®, and AFLAS® elasto- meric). Three tubes sit horizontally in the instrument and are fitted with low mass pistons with a low friction coating that oscillate between two detectors to quickly and accurately measure gas flow rates.Features5 – 50,000 sccm Flow Range0.15% Measurement UncertaintyCorrosive and Combustible Gas CompatibilityAll-In-One Automatic Measurement – Automatic Ranging Based on Flow RateCompressibility Factor Correction Utilitizes NIST REFPROP compressibility factor correction for non-ideal gas behavior1/2″ VCR FittingsProven DryCal Technology – Accurate and reliable gas flow readings independent of gas species measured.Innovative – Ability to calibrate with actual corrosive gases such as NH3; All-in-one system requires no switching of cells or blocs between 5 to 50,000 sccm flow ratesEasy to setup and use – plug and play installation with simple push button operationQuality and Expertise —0.08% Scope of Accreditation for gas flow by NVLAP of NIST; Over 20 years experience providing training, installations, system consulting and custom solutionsData Ports: Serial (RS-232) & USB Flow Range: 5-50,000 sccmLow Tube: 5-500 sccmMedium Tube: 350-5,000 sccmHigh Tube: 3,500-50,000 sccmMeasurement Gas Pressure Range: Atmospheric Pressure +/-.5PSIATemperature Range - Operating: 15-30oCTemperature Sensors (One Per Tube):Accuracy +/-.03% (max), sensor is located in incoming gasstreamTemperature Range - Storage: 0-70oCPressure Transducer: 0-16 PSI (absolute), accuracy .05% FSGas Compatibility / Wetted PathMaterials:Gases compatible with (316/304 SS, borosilicate glass, Teflon,AFLAS elastomeric)Compressibility Factor Correction:User selection of gases to apply compressibility factor correctionfor non-ideal gas behaviorLanguage Selection for Display: English, German, Spanish, Italian, DutchPower Supply: External Power ModuleInput: 100-240VAC, 1.5A 50-60 HzOutput: 24VDC, 3.0AUser Interface: Touch screen or via Commands through data portData Port Connections: R2-232 and USBInlet and Outlet Fitting: 1/2 inch VCR fittingApproximate Measurement Interval: Flow dependent (.5-60 seconds) typical 2 secondsDimensions: 22” (56cm) w x 15” (38cm) h x 13” (33cm) dWeight: 62 lbs - 28 kilogramsWarranty: 1 year (battery 6 months)ROHS Compliant: YESMeasurement UncertaintyStandardized Flow: 0.15% of reading and +/-0.01 sccmVolumetric Flow: 0.15% of reading and +/-0.01 ccm